Tyre carrier for tyres in default size and oversized
The tyre carrier for the Sprinter 906, 907 and 910 series enables the transport of spare tyres. This preserves valuable storage space inside the vehicle. The tyre carrier is made of 40mm steel tube and is powder coated black. It is attached to both the door hinges and the rear door itself and is firmly connected by screwing the rim over the rim holes with the holder. A protective cap with lock is included for theft protection. The tyre carrier is only available for the left side. Self-assembly is possible on vehicles with an opening angle of 180 degrees. For a 270 degree opening angle, an adjustment to the hinges must be done before the assembly to prevent collision of the spare wheel with the vehicle body. We gladly offer the replacement as well as the assembly of the tyre carrier as part of our workshop services.
Retractable rear step
The rear step is made of steel and is powder coated black. It has to be pushed back and forth manually and provides a big and non-slip tread for loads up to 200kg. Unlocking the rear step is done by lifting the tread edge. The step is locked automatically and securely in both end positions. The rear step is intended for Sprinters of the 906, 907 and 910 series without a tow hitch.
Grille guard for MB Sprinter 906
The grille guard for the Sprinter 906 is made of 1.2mm thick stainless steel tube and protects the front of the vehicle against obstacles coming from the front. In addition, it gives your vehicle a rugged offroad look. The grille guard is approved in the EU for vehicles with a total mass of 3.5t. For a perfect look and fast installation, it has a vehicle-specific design.
Grille guard for MB sprinter 907/910
The grille guard for the Sprinter 907 and 910 is made of 1.2mm thick stainless steel tube and protects the front of the vehicle against obstacles coming from the front. In addition, it gives your vehicle a rugged offroad look. The grille guard is approved in the EU for vehicles with a total mass of 3.5t. For a perfect look and fast installation, it has a vehicle-specific design.
Tank protection RAW for MB Sprinter 907
The tank protection is made of 8 mm thick aluminum. It is developed by us and fits with the Mercedes-Benz Sprinter Series 907. Thanks to its robust construction it provides protection when driving on sharp obstacles such as sharp-edged rocks, thick stumps or other hazards that could damage a fuel tank unnoticeably and lead to a complete breakdown in the wild. We gladly take over the assembly as part of our workshop services.
Ladder for rear door ALUMINIUM
The rear door ladder is made of aluminum and for a small additional charge it can be painted upon request in your desired color. It is clamped to the rear door of the Sprinter 906, 907 or 910 series, therefore drilling can be avoided. Your door remains undamaged and the ladder can be removed at any time. The assembly is very easy and the ladder is suitable for both rear doors, right and left. The load capacity is 100 kg. We gladly take over the assembly as part of our workshop services.
The Pioneer platform from “Rhino Rack” is made of corrosion-resistant aluminum. Thanks to its robust and resistant construction it offers the perfect solution for the transport of luggage and equipment of all kinds. The large loading area also offers plenty of space for large and small trips. We gladly take over the installation of the roof rack on your Sprinter 906, 907 or 910 series as part of our workshop services.
Snorkel RAW/ filter (TOP-LUFT®)
This air filter pre-separator is hand-made by RAW. It is mounted on the A-pillar on the left and is available in powder coated black for the Sprinter 906, 907 or 910 series. It is made of an aluminium tube with 90mm diameter. Together with the cyclone pre-filter it prevents dirt particles from the intake air to enter the engine or the original air filter. It is maintenance-free and wear-free and has a robust design for extreme loads. The need to empty any collecting container is avoided by the provision of the lateral particle ejection. We gladly take over the installation of the snorkel as part of our workshop services.
Price: 1.199,00 €
The worldwide known winch of the company “WARN” is a must have for every offroad adventure. With the kit we put together you can free your deadlocked Sprinter 906, 907 and 910 from any seemingly hopeless situation. The winch is driven by the winch’s own motor. The installation of a sprinter-specific frontal shot is required in order to use this winch on the front of your Sprinter. In addition, the winch must be mounted firmly on the Multimount carrier kit before the first use. Without much effort, the prepared winch can be mounted on the frontal shot when necessary and fastened with a bolt by using the supplied handles. The winch is now ready for use and can be activated with the wired remote control. Due to the short range of only 3.7m, but especially for security reasons, we recommend the use of the included remote control, which has a much higher range. Furthermore, we rely on plastic ropes, as they are lighter and quieter, but have a similar robustness and tear strength as steel ropes. We gladly take over the assembly as part of our workshop services.
Price: 2.799,00 €
This winch holder from our company is a useful additional product to the actual winch. It enables traffic-safe transport of the winch in the interior of your van. The steel holder is bolted directly to the bottom of the rear area. This way it provides a firm hold of the winch in any driving situation. When needed the winch can be easily detached from the holder. We gladly take over the assembly as part of our workshop services.
Movable lateral step for sliding door for 906
The wide and robust step from “AlphaDynamik” allows a comfortable entry at optimal entry height in the Sprinter 906 (built 2006-2018). The manual folding and unfolding of the step ensures easy use and assembly. When the step is folded, it is located inside the room. This way it is protected and serves as a footwell extension in the long version. In the short version, it is not suitable as a footwell extension. A useful addition to the step is a mechanical closing aid that allows easy entry and exit without dislocations and dirty hands (see photos!). We gladly take over the assembly of the step as part of our workshop services.
Transfer case guard
The protection plate for the transfer case from”Iglhaut” for the Sprinter 906, 907 and 910 is made of an 8mm aluminum plate and protects the transfer case against obstacles. The protection can also be mounted on a Mercedes Werksallrad. We gladly take over the installation of the protection for you as part of our workshop services.
Front axle guard RAW
The protection plate from our company for the Sprinter 906, 907 and 910 is made of an 8mm aluminium plate and protects the oil sump, steering gear, front axle gear and the axle carrier against obstacles. The front axle protection can also be mounted on a Mercedes Werksallrad. We gladly take over the installation of the front axle guard as part of our works services.
The side bar tubes from “AlphaDynamik” are made of stainless steel and brushed matt. The tube has a diameter of 60 mm and is bolted firmly to the supporting sill below the driver and passenger door. This protects the vehicle construction and visually upgrades the Sprinter 906, 907 or 910 . We gladly take over the installation of the side bar as part of our workshop services.
Cover for spare tyre with storage compartment
The cover from the company “ORC” serves as storage compartment in the spare tyre of your Sprinter. Gloves, tools, straps or a small compressor can be accommodated in the box. In addition, it serves as theft protection as it is lockable via a key. On request, the standard grey cover can be painted. To customize the cover to your replacement tyre we will need to know your rim after ordering. We can gladly take care of the subsequent assembly as part of our workshop services.
Changing tires for MB Sprinter 906/907 – 245/75R16 on steel rim
For the MB Sprinter 906 we offer you the change to 1 set (4 pcs.) BF Goodrich All-Terrain off-road tires in size 245 / 75R16. Our team assembles and balances the tires on your original Mercedes-Benz steel rims. The additional TÜV-compliant speedometer adjustment takes place without additional hardware or software by coding the original software. In this way, the operating licence to participate in the traffic is regained. This is underpinned by the acceptance of the technical service like TÜV SÜD, Dekra, KÜS, GTÜ etc..